Little Help Here,,,

[Craig Mac]

I have a small 50 count with a glass top. I originally used the velcro it came with to attach the humidifier to the glass top(for easy viewing if it needed to be refilled or not), but the velcro stopped sticking to the glass and would easily pull off when I needed to refill it, so I changed it over to a magnet I had, and that lasted about 8 months before falling off. The magnet just won't stick to the plastic, I put some "Duco Cement" on it as per directions, but it just fell off and now the "tacky" stuff on the back of the magnet has turned to a hard surface. What product can anyone recomend that will bond to the plastic of the humidifier and magnet so I can put this back where it belongs???

 

[Crypto Sailor]

Man just get a vino and no need for anything sticky... Maybe you can use a little(and I mean a little) gorilla glue...

 

[dpricenator]

Epoxy, gorilla glue, crazy glue..etc...but it has to set and cure before you close the lid. that might mean re-seasoning the humi, as you will want to let it cure for several ays...open.

 

[Craig Mac]

Epoxy, gorilla glue, crazy glue..etc...but it has to set and cure before you close the lid. that might mean re-seasoning the humi, as you will want to let it cure for several ays...open.

The magnet inside the humidor sticks just fine, I just need something to adhere the magnet on the back of the humidifier. I'll try to put some gorilla glue on it next.

 

[weskimad]

I used 3M double stick tape to secure the magnet to my humidifier. About 2 years so far with no issues.

 

[Jfire]

I used 3M double stick tape to secure the magnet to my humidifier. About 2 years so far with no issues.

This would be my suggestion as well. 3M makes some great products.