Today I finalized the manufacturing of the shelves. I realized today that the 4 new ceder trays I bought did not match the 4 ones that I already had in size. So the tilted shelves is in 2 different lengths. I specially bought small shelve pins tht are round in on end and flt in the oter. The idea was to counterzink them into the tilted shelves to act as a stopper. After 45 minutes of searcing and 5 minutes of destroying things I realized that I probably threw them away at som point. I have used screws instead and I will think about if I am going to replace them at a later stage.
I have painted all of the mouldings again. It is especially critical for the acrylic soft jointing as it turns yellow after a while. I have also built a box with a plastic cointainer and a stand. This is for the humidifier to stand on and act as a collector if water leaks out. I built it of the same material as the shelves. You can se the humidifier on the pictures. I also bought a fan today. I have not desided if it should be placed on the floor or attached to the white wall above the humidifier. I will have the wine rack in the picture, either where it is placed now or beside the humidifier on the white wall.
I brushed and polished the metal plate to the keyless lock and fitted it back on the door frame.
Now the walk-in is almost done!
