Humi Care Help

[Martin3203]

I think with the units we have, the fan actually blows down onto whatever media you use inside and the air is pushed out the sides.

 

[jonesry09]

I think with the units we have, the fan actually blows down onto whatever media you use inside and the air is pushed out the sides.

Good to know. If you do the beads, let me know how it works out and vice versa

 

[sofc]

You guys have a pic of the set up? All this talk got me curious

Sent from my SM-N900V using Tapatalk

 

[DoubleA]

How did you guys get the green foam out without ruining the base? I have the electronic unit also but can't see how to get that out.

 

[mdwest]

with the Hydra unit, you have to go through the large hole in the center... you just cut it into small enough chunks and pull it out piece by piece...

with an Oasis you can pull the top off of the container.. just slip a small screwdriver into the seal and turn it near the 4 corners.. the top will pop right off...

Havent looked at a Humi-Care close enough to know how to get at the foam on that one.. but Im guessing one of the 2 methods above would work...

 

[Martin3203]

How did you guys get the green foam out without ruining the base? I have the electronic unit also but can't see how to get that out.

I did mine last night, I used a spoon and shoveled it out.

 

[DoubleA]

How did you guys get the green foam out without ruining the base? I have the electronic unit also but can't see how to get that out.

I did mine last night, I used a spoon and shoveled it out.

Well I'll definitely give that a try. Gotta get some beads first. Thanks!